| |
|
 |
Voltoid D-100 FR
|
|
Home
|
Voltoid D-100 FR
Electrical Barrier Material
|
|
|
| Voltoid® D-100 FR is a flame-resistant electrical and mechanical barrier material. It has good physical strength and electrical insulating characteristics and is intended for formed or flat parts that require resistance to flame, such as smoke detector insulation, microwave oven air duct insulation, switch spacer, TV antenna strain relief insulation, TV terminal insulator, and terminal block lead barrier insulation. |
|
|
|
|
Dielectric Strength, Volts/mil. |
175 |
ASTM D 149 |
|
Hot Wire Ignition (HWI), seconds |
28 |
ASTM D 3874 |
|
High Ampere Arc Ignition (HAI), # arcs |
114 |
UL 746 A |
|
Arc Resistance, seconds |
127 |
ASTM D 495 |
|
Comparative Tracking Index, (CTI), volts |
180 |
ASTM D 3638 |
|
Flammability Class |
V-0 |
UL 94 |
|
Relative Temperature Index, Electrical (oC) |
90 |
UL 746 C |
|
Relative Temperature Index, Mechanical (oC) |
90 |
UL 746 C |
|
UL File Number |
E215806 |
|
|
Density, g/cc(lb/cu.ft) |
1.10 (68.6) (min.) |
ASTM F 1315 |
|
Tensile Strength, MD, MPa(psi) |
66 (9500) (min.) |
ASTM F 152 |
|
Tensile Strength, AMD, MPa(psi) |
48 (7000) (min.) |
ASTM F 152 |
|
Compressibility, % (at 6.9MPa) |
6 |
ASTM F 36 |
|
Fluid Resistance, Distilled Water |
|
ASTM F 146 |
| Change in Weight, % |
|
40 |
|
|
Color |
Black |
|
|
|
|
| Specification values determined by the test methods required for ASTM F-104, Type 3 materials. |
|
|
|
EnCore, Hydro-Fused, Pro-Formance, Select-a-Seal, Syntheseal, Thermo-Tork, and Voltoid are registered trademarks of Interface Solutions, Inc. MicroPore is a trademark of Interface Solutions, Inc.
WARNING: The performance data provided herein represent typical values. This data sheet is not intended to be used as a purchase specification and does not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Solutions.
INTERFACE SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY OTHER PERSON OR ENTITY.
|
|
| |
North America, Interface Solutions, Inc.
22260 Haggerty Road, Suite 200
Northville, MI 48167 USA
|
|
Tel: 800-9GASKET (800-942-7538)
Tel: (Outside USA) 1-248-596-2800
Fax: 248-596-2880
|
|
| |
Korea, Interface Solutions
Room 406, Office Line, #401 Green Plaza,, 19-2 Soonae-Dong, Boondang-Gu, Seongnam-City, Kyunggi-Do
South Korea, 463-825
|
|
Tel: +82-31-716-1923
Fax: +82-31-716-7235
|
|
| |
Europe, Interface Solutions International, S.A.R.L.
64240 Bonloc, France
|
|
Tel: +33 (0) 5 59 29 12 20
Fax: +33 (0) 5 59 29 18 85
|
|
|
Previous Revision Date: 12-14-2005
Latest Revision Date: 12-14-2005
|
|
